Coltene Jet Bite

TECHNICAL SPECIFICATIONS :-

• Smooth mousse-like consistency – No resistance to closure, no rebound
• Jet Bite fast 70 seconds total working time
• Working time maximum 20 s
• Oral setting time minimum 50 s

• 2 x 50ml Cartridges
• 12 x Mixing tips
• 12 x Spreader tips

• Dispense the bite registration material directly onto the occlusal surface of the lower teeth and move mandibula into central occlusion
• Always check intraorally if the material has set before removing the registration
• High temperatures accelerate and low temperatures slow down setting
• Inspect the models for projections (bubbles) from voids in the impression
• Remove these bubbles before articulating the models since these projections may prevent the proper seating of the bite registration
• Once the impression of the bite has set and has been removed from the mouth, it is vital that all gingival contact be trimmed down with a sharp knife to remove any undercuts
• Trimming the bite registration in this manner will prevent any rebound when the models are articulated
• Removing the gingival contact will also permit visual inspection to make certain that the bite registration is properly seated
• The material may be used in the „closed mouth“ or „preoccluded“ technique
•  Guide the patient into centric before  applying JET BITE