Cicada 1 Sec Light Cure Unit

• Rapid 1-sec composite solidification
• Adjustable modes for varied treatments
• High-intensity blue light for efficient curing
• Compact, lightweight design for maneuverability
• Intuitive countdown and audible cues
• Automatic power-off after 2 minutes
• Low-power detection and timely recharging
• Hygienic disposable sleeve for each use

The Cicada 1 Sec Light Cure Unit is an advanced dental device designed to facilitate efficient and rapid curing of dental resins and materials. With its innovative features and precise performance, this curing unit revolutionizes the dental practice by significantly reducing curing times while ensuring optimal results.

Measuring at a compact 25mm x 240mm and weighing just 278g, the Cicada 1 Sec Light Cure Unit boasts a sleek and lightweight design that enhances user comfort and maneuverability. It is equipped with a rechargeable Lithium battery, specifically an ICR 18490 model, featuring a robust 3.7V/1050mAh capacity. This battery not only provides ample power for extended usage but also incorporates essential safeguards against over-voltage, over-current, and short circuits, prioritizing both performance and user safety.

The unit’s power source compatibility is equally impressive, accommodating power inputs from AC 100V to 240V and operating at a frequency of 50Hz/60Hz. The included adapter boasts a power input of 10VA and delivers a DC output of 5V/1A, ensuring reliable and consistent power supply for optimal device operation.

At the heart of the Cicada 1 Sec Light Cure Unit lies its high-power blue light LED source. Emitting light in the wavelength range of 450nm to 455nm, this cutting-edge LED aligns perfectly with the solidification requirements of clinical dental resins, making it compatible with leading brands such as 3M and Dentsply. The adjustable light intensity, ranging from 800 mW/cm² to an impressive 1400 mW/cm², offers dental professionals the flexibility to tailor the curing process to specific needs.

The unit’s operating conditions are designed to maximize usability and effectiveness. It can function within a temperature range of +5°C to +40°C, accommodating relative humidity levels between 10% and 93%. Moreover, the Cicada 1 Sec Light Cure Unit can operate seamlessly under atmospheric pressures ranging from 70kPa to 106kPa, ensuring consistent performance regardless of environmental conditions.

Safety remains a paramount concern, and this unit addresses it comprehensively. It employs an intermittent operating mode and adheres to Class II electrical shock protection standards, backed by a Type B protection degree. The device also shields against water and particle ingress, attaining an ordinary equipment rating of IPX0. Importantly, the unit is not intended for use with flammable anesthetic mixtures involving air, oxygen, or nitrous oxide.

The Cicada 1 Sec Light Cure Unit’s ease of use and convenience are evident from its installation and operation. The unit’s adjustable top can rotate 360 degrees to accommodate user preferences while charging. Charging is achieved by connecting the adapter to the power source and linking it to the pedestal. The device offers three operational modes: Standard Mode, Ramp Mode, and Strong Mode, each with adjustable time intervals and light intensities to suit diverse clinical scenarios.

During operation, the unit employs a disposable sleeve to ensure hygiene and precise application. Activating the device with the ON/OFF button triggers a “Bi” sound, initiating the emission of blue light for curing. The device features countdown timers for different modes and emits intermittent tones during operation. It can be paused using the power button and restarted for additional cycles, with a recommended cycle limit of 10.

A low-power detection circuit inside the unit triggers a blinking screen for timely recharging. Charging involves connecting the unit to the pedestal, indicated by a blue logo and a scrolling display. Upon completion, the display shows “111” to signify the end of charging.

To conserve energy, the unit automatically turns off after 2 minutes of inactivity and can be reactivated by pressing any button. It is designed to solidify composite materials at a depth of at least 4mm in just 1 second, showcasing its efficiency and effectiveness.

The Cicada 1 Sec Light Cure Unit introduces a paradigm shift in dental curing technology through its distinctive operational modes, each tailored to meet varying clinical requirements. Seamlessly integrating advanced features and user-centric design, this device empowers dental professionals with unparalleled control and efficiency.

Standard Mode: In this mode, denoted as “Pl” on the screen, the Cicada 1 Sec Light Cure Unit delivers a balanced and versatile curing experience. The user can select from a range of time intervals, including 5 seconds, 10 seconds, 15 seconds, and 20 seconds. This mode ensures the emission of blue light with an intensity of approximately 800-1000 mW/cm², catering to a broad spectrum of dental applications.

Ramp Mode: Labeled as “P2,” the Ramp Mode offers a gradual and controlled curing process. Dental practitioners can choose from time intervals of 5 seconds, 10 seconds, 15 seconds, and 20 seconds. This mode mirrors the blue light intensity of 800-1000 mW/cm², fostering a meticulous curing process that is well-suited for specific dental treatments demanding precision and gradual solidification.

Strong Mode: Distinctly marked as “P3,” the Strong Mode stands out for its high-intensity curing capabilities. This mode is characterized by shorter time intervals, enabling swift and potent curing cycles. Dental professionals can opt for time intervals of 1 second or 3 seconds. Notably, the Strong Mode delivers an impressive light intensity of approximately 1400 mW/cm², ensuring rapid and effective solidification of dental resins.

Power Source:

• Rechargeable Lithium battery: ICR 18490
• Battery voltage and capacity: 3.7V/1050mAh
• Battery protection: Over-voltage, over-current, short circuit

Adapter:

• Power Input: AC 100V-240V, 50Hz/60Hz
• Input Power: 10VA
• Power Output: DC 5V/1A

Light Source:

• High-power blue light LED
• Wavelength: 450nm-455nm
• Adjustable light intensity: 800 mW/cm²~1400m W/cm²

Operating Conditions:

• Temperature range: +5°C to +40°C
• Relative humidity: 10%~93%
• Atmospheric pressure: 70kPa to 106kPa

Operational Modes:

Standard Mode:

• Adjustable time intervals: 5s, 10s, 15s, 20s
• Light intensity: 800-1000 mW/cm²

Ramp Mode:

• Adjustable time intervals: 5s, 10s, 15s, 20s
• Light intensity: 800-1000 mW/cm²

Strong Mode:

• Adjustable time intervals: 1s, 3s
• Light intensity: 1400 mW/cm²

• 1 x Light guide rod
• 1 x Main unit (Host)
• 1 x Power Adapter
• 20 x Disposable pe isolation Sleeve
• 1 x Shading Sheet
• 1 x Silicone Base

Preparation:

• Ensure the device is fully charged or connected to a power source before use.
• Familiarize yourself with the operational modes and their corresponding features.

Installation:

• Place the Cicada 1 Sec Light Cure Unit onto a stable surface.
• Adjust the top of the unit to your preferred angle, ensuring comfortable access during operation.

Power On and Mode Selection:

• Press the ON/OFF button to activate the device. You’ll hear a “Bi” sound, confirming its activation.
• The display screen will show the initial mode, which is usually Standard Mode (“Pl”).
• To switch between modes, press the MODE button to cycle through Standard Mode, Ramp Mode, and Strong Mode.

Time and Intensity Settings:

• Use the TIME button to select the desired curing time for the chosen mode. Standard Mode and Ramp Mode typically offer time intervals of 5s, 10s, 15s, and 20s. Strong Mode may offer 1s and 3s intervals.
• Refer to the manual for recommended time settings based on the dental procedure.

Initiating Curing:

• Once you’ve selected the mode and time interval, aim the top of the device at the treatment area.
• Press the ON/OFF button to start the curing process. The blue LED light will emit, indicating that the curing is underway.

Countdown and Audible Cues:

• The device will begin a countdown based on the selected time interval.
• Audible cues will be emitted at 5-second intervals during the countdown to help you track the progress.

Pausing and Adjusting:

• If necessary, you can pause the curing process at any time by pressing the power button.
• Adjust the position of the device or attend to the treatment area as needed.

Completion and Restart:

• At the end of the selected time interval, the device will emit a tone to signal completion.
• You can initiate another curing cycle by toggling the ON/OFF button for subsequent treatments.

Charging and Maintenance:

• If the device’s low-power indicator blinks, it’s time to recharge. Connect the adapter to an AC power source and then to the pedestal. Place the device onto the charging point of the pedestal, and charging will commence. The logo will turn blue, and the display screen will scroll during charging.
• The device will automatically turn off after 2 minutes of inactivity to conserve energy.