-
US$641.00
US$740.003m Espe Ss Crown Permanent Molar – Intro Kit Po96
US$641.00US$740.00 -
US$613.00
US$710.003m Espe Ss Crown Primary Molar – Intro Kit Nd96
US$613.00US$710.00 -
3M ESPE Stainless Steel Crown Primary Molar Intro Kit ND96
- Arch – Upper/Lower
- Brands – 3M
- Catalog Number – ND-96
- Dentition – Primary
- Number of Crowns – 96
- Patient – Pediatric
- Size – Assorted
- Tooth – Assorted Molars, First Molar
US$599.00US$700.003M ESPE Stainless Steel Crown Primary Molar Intro Kit ND96
US$599.00US$700.00 -
3m Espe Pedodontic Strip Crown Kit
- Pediatric anterior crown applications.
- Ideal for use with chemical or light-cured composites.
US$487.00US$545.003m Espe Pedodontic Strip Crown Kit
US$487.00US$545.00 -
US$230.00
US$235.003M ESPE Filtek Z350 XT Restorative Procedural Kit
US$230.00US$235.00 -
US$199.00
US$300.003M ESPE Relyx U200 Self Adhesive Resin Cement
US$199.00US$300.00 -
3m Espe Relyx U200 Self-Adhesive Resin Cement
- Comfortable handling
- Optimal consistency for dispensing and seating
- Flexible dosing
- Time-saving
- A great choice of tips allows always easy application of paste directly into the cavity
- Low risk of air bubbles and voids
US$174.00US$220.003m Espe Relyx U200 Self-Adhesive Resin Cement
US$174.00US$220.00 -
US$173.00
US$250.003M ESPE Protemp 4 Temporisation Material Temporary Crown Material
US$173.00US$250.00 -
US$170.00
US$210.003m Espe Relyx Ultimate Adhesive Resin Cement
US$170.00US$210.00 -
3M Espe Retraction Capsule
- The extra fine tip fits directly into the sulcus.
- Enables a clean, dry sulcus and robust hemostasis.
- Hygienic unit-dose capsule.
- Versus dental retraction cords:
US$144.00US$185.003M Espe Retraction Capsule
US$144.00US$185.00 -
US$143.00
US$190.003M ESPE Relyx U200 Automix Self Adhesive Resin Cement
US$143.00US$190.00 -
US$140.00
US$180.003m Espe Monophase Polyether Impression Material
US$140.00US$180.00 -
US$127.00
US$170.003m Espe Impregum Soft – Refills
US$127.00US$170.00 -
3m Unitek Transbond Mip Primer Bottle
- Original Made In USA
- Moisture Insensitive Primer means not physically or chemically sensitive to small quantities of moisture.
- Clinically, it means after rinsing and thoroughly removing etchant, drying of tooth surface before priming is not required.
- Transbond MIP works with Transbond XT and LR capsules, Transbond XT syringes, and APC Adhesive Coating System.
- Transbond MIP primer has been qualified for both Concise and Unite Chemical Cure Adhesives as well as Sondhi Rapid Set Indirect Bonding Adhesive.
US$95.00US$150.003m Unitek Transbond Mip Primer Bottle
US$95.00US$150.00 -
US$94.00
US$130.003M Espe Mixing Tips (Blue) Pack Of 8
US$94.00US$130.00 -
US$89.00
US$110.003M ESPE Relyx Luting 2 Refill Pack
US$89.00US$110.00 -
US$87.00
US$96.003m Espe Sof-Lex Spiral Wheels- Diamond Polishing System Kit
US$87.00US$96.00 -
US$85.00
US$94.003m Espe Filtek Z350 Xt Restorative Syringe
US$85.00US$94.00 -
-
US$77.00
US$84.003m Espe Sof-Lex Finishing Strips – Refills
US$77.00US$84.00 -
US$75.00
US$104.003M ESPE Single Bond Universal Adhesive Bonding Agent 5ML
US$75.00US$104.00 -
US$72.00
US$89.003M ESPE Ketac Cem Radiopaque Glass Ionomer Luting Cement
US$72.00US$89.00 -
US$71.00
US$76.003M ESPE Filtek Bulk Fill Cap (4864A2)
US$71.00US$76.00 -
US$69.00
US$90.003M Unitek Transbond XT Primer Light Cure Adhesive
US$69.00US$90.00 -
US$64.00
US$70.003m Espe P-60 Micro Hybrid Posterior Syringe
US$64.00US$70.00 -
US$63.00
US$68.003M ESPE Ketac Cem Easy Mix Glass Ionomer Cement
US$63.00US$68.00 -
3M ESPE Unitek Transbond XT Orthodontic Adhesive
- Original Made In USA
- Command Cure
- Immediate Bond Strength
- Excellent Handling Properties
- Extended Working Time
US$59.00US$90.003M ESPE Unitek Transbond XT Orthodontic Adhesive
US$59.00US$90.00 -
3M ESPE Composite Syringe & Bond Keeping Stand
- Smart design.
- Compartments for accessories.
- Beautiful and strong built.
- Composite organizer with 12 Holes
US$59.00US$70.003M ESPE Composite Syringe & Bond Keeping Stand
US$59.00US$70.00 -
US$55.00
US$75.003M ESPE Filtek P60 Posterior Restorative
US$55.00US$75.00 -
3m Espe Vps Tray Adhesive
STEP 1: Select and/or prepare a suitable tray. Prior to application of Tray Adhesive, trial fit tray for proper fit and extension.
STEP 2: After proper fit is assured, rinse and thoroughly dry tray.
STEP 3: Brush a thin layer of Tray Adhesive onto the tray surfaces that will be covered with impression material and allow to air dry for at least five minutes, but no more than 30 minutes. Repeat application if greater than 30 minutes have elapsed.
US$54.00US$60.003m Espe Vps Tray Adhesive
US$54.00US$60.00 -
US$53.00
US$70.003M ESPE Ketac Molar Glass Ionomer Cement
US$53.00US$70.00 -
US$49.00
US$74.003M ESPE Single Bond Universal Adhesive Bonding Agent 3ML
US$49.00US$74.00 -
-
US$48.00
US$54.003m Espe Pediatric Strip Crown Forms
US$48.00US$54.00 -
US$48.00
US$54.003M Espe Filtek Z250 Xt Restorative Syringe
US$48.00US$54.00 -
US$44.00
US$49.003M Paedodontic Zirconia Crowns Refills
US$44.00US$49.00 -
US$35.00
US$60.003M ESPE Cavit g Temporary Filling Material
US$35.00US$60.00 -
US$34.00
US$39.003m Espe Sof-Lex Polishing Discs – Kits & Accessories
US$34.00US$39.00 -
US$31.00
US$35.003M Espe SS Crown Primary Molar Crown-D (1st molar)
US$31.00US$35.00 -
3m Espe Stainless Steel Primary Crown E( 2nd Molar)
- Benefits:
Pre-trimmed, belled and crimped for fast and easy placement.
Accurately duplicates anatomy for better fit and performance.
Superior longevity compared to multi-surface amalgam fillings.
Permanent molar selection can be used for long-term cases with economic considerations.
Crown set is packaged in a unique, stackable tray that provides convenient, easy storage of 3M™ ESPE™ prefabricated crowns.
US$31.00US$35.003m Espe Stainless Steel Primary Crown E( 2nd Molar)
US$31.00US$35.00 -
3m Espe Elipar Deepcure Led – Curing Light
- High intensity for fast, complete cure.
- 10mm light guide for one-shot curing.
- Special optics maintain uniform light intensity for greater depth of cure.
-
3m Espe Polycarbonate Crowns
- Polycarbonate material contours and crimps similar to metal crowns to yield easy adaptation to margins.
- Made from polycarbonate resin with microglass fibers for strength and durability.
-
3m Espe Clinpro Xt Varnish Fluoride Releasing Coating
Site specific light cured RMGIC that creates a temporary barrier against demineralisation & acid erosion.
Offers up to 6 months protection & can help repair demineralised enamel adjacent to XT coating by up to 2mm.
Delivers fluoride, calcium and phosphate and can be readily recharged using a fluoride toothpaste (e.g: Clinpro Tooth Crème).
-
3m Espe Clinpro Prophy(Pack Of 25)
Specially formulated paste to minimize splattering during polishing.
• Releases fluoride during polishing procedure.
• 3 different grits: fine, medium and coarse for the right choice in abrasion management.
• 2 flavors: mint and cherry.
• Available in unit-dose cups for easy use and improved infection control. -
3M ESPE Disposable Applicator Tips
- Head bends to any angle.
- Wide handle with webbing for better handling.
- Non-linting fibers suitable for scrubbing.
- Ease of reach in confined areas.
-
3m Espe Ketac Universal Glass Ionomer Restorative
- Linings for single- and multi-surface composite fillings
- Core build-up prior to crown placement
- Primary tooth fillings
- Restricted stress-bearing Class I and Class II restorations
- Cervical Fillings
